Large Motor Support (with three ram trim system)

$79.00

The technology behind the m-ywedge™ is fiendishly simple. Constructed from EPDM rubber and high-tech plastic, it simply fits over the outboard's trim & tilt piston. When the motor meets the rubber as it's tilted down, it self-centers to form a cushioned stable platform that seals on both ends for safe, dependable trailering at the correct height and eliminates trailer shock.

Thanks to advances in boat-building technology over the last decade, modern transoms are created to withstand torque. That's why the m-ywedge™ is so long overdue. It's only eight inches long, so it fits in any boat storage compartment, unlike the old style transom saver. It works with manual or hydraulic jack plates, and regular or long shaft models. It's virtually indestructible as well as UV and saltwater resistant. It won't harm the trailer, outboard or boat and perhaps most importantly, it completely eliminates the need to lean underneath the boat for installation, nothing to hold on to.

Safe, convenient, and easy to use and store, the m-ywedge™ is the answer to every outboard boater's needs.

  • Mercury: 135-300hp with 3 RAM Trim/Tilt systems, (INCLUDES VERADO 4 CYLINDERS)
  • Yamaha: 115hp-350hp with 3 RAM Trim/Tilt systems
  • Suzuki: DF90,DF140-DF300hp 4-Stroke with 3 RAM Trim/Tilt systems (some Suzuki engines have a plastic housing around the main tilt piston shaft, we don't recommend using the universal m-ywedge unit on these engines.)
  • Johnson: 60hp-250hp 4-Stroke with 3 RAM Trim/Tilt systems
  • Johnson/Evinrude V4: with 3 RAM Trim/Tilt systems
  • Johnson/Evinrude V6: 150hp-250hp with 3 RAM Trim/Tilt systems
  • Works on these models: Carb. EFI, Opti-Max, 2-Stroke, 4-Stroke, Hpdi, ETEC,Ficht and Offshore, with 3 RAM Trim/Tilt Systems.

Installation Instructions

Install on trim/tilt switch side, normally Starboard Side of Mercury/ Honda /Johnson 4-Stroke, Johnson/Evinrude Outboards.

Install on trim/tilt switch side, normally Port Side of Yamaha/Suzuki Outboards, F300-F350 V-8 models need 2 m-ywedge units, port and starboard.

  1. Trim outboard to up position.
  2. Slide M-Y Wedge on Trim/Tilt switch side (normally port side of Yamaha/Suzuki outboards and starboard side of Mercury/Honda/Johnson/Evinrude) over Trim/Tilt piston rod of lower unit. Note: The trim/tile switch may be on the starboard side of some Yamaha and Suzuki models.
  3. M-Y Wedge will position and self-center, slide completely down.
  4. Trim outboard down until the rubber begins to compress.
  5. To remove M-Y Wedge simply trim outboard to up position and remove.
  6. Store M-Y Wedge in any boat compartment for convenience.

Note: We recommend that you rotate M-Y Wedge 1/4 to 1/2 turn after each use. This helps even the compression of the EPDM Rubber on the unit.

Product Number: Lge Support

$79.00

In & Outboard Marine

1 Gonzales Road
Stuart Park, Darwin, NT, 0820

Telephone: (08) 8924 0240
Facsimile: (08) 8924 0250
Email: info@iomarine.com

Trading Hours

Monday to Fri: 8:30am – 5:00pm
Saturday: 8:30am – 1:00pm
Sunday & Public Holidays Closed

 (08) 8924 0240

About Us

In & Outboard Marine is the leading marine dealership in Darwin, servicing Australia's Top End and beyond with Australia's leading brands of boats, engines and accessories.

As one of the largest dealerships in Australia, we stock well over 100 new and used boats at any one time.

Selling your boat? Find out how we can help.

Yamaha Hot News

There doesn't appear to be any news for this topic! Please check back later.

Yamaha Motor Finance
Yamaha Motor Insurance